front suspension
Thread Starter
4th Gear
Joined: Nov 2011
Posts: 4
Likes: 0
front suspension
Anybody install the front composite monospring conversion system that Corvette Central sells? Does it come close to doing the things the advertisement says? Like improving ride and handling? Thanks in advance for any feedback. Have a happy and safe holiday to everyone.
Drifting
Joined: May 2005
Posts: 1,968
Likes: 44
From: East TN
I'm not sure about the kit Corvette Central sells, probably the same as mine made by Vette Brake Products. I installed the VBP full kit (front and rear) and it was a huge difference.
http://www.vbandp.com/auto-parts.htm...category_id=54
http://www.vbandp.com/auto-parts.htm...category_id=54
Racer
Joined: Sep 2013
Posts: 284
Likes: 16
From: St Louis MO http://1972corvetterestomod.blogspot.com/
My car is still in pieces so can't vouch for handling, etc, but another endorsement for VBP Performance Plus System... the parts look great out of the box, customer service has been very helpful.
Melting Slicks
Joined: May 2012
Posts: 2,192
Likes: 343
From: Allenton Wisconsin
I have the same kit as MIKE80 in the 6t8. Been there 15+ years, handles like - well I can pass C6s on the track, as far as ride improvement goes well it doesn't ride as nice as the 9car with just minor suspension upgrades. I put in a comp rear spring last summer and a rear sway bar and that really helped the ride and handling [9car]. I like the coils up front but was thinking of increasing the front sway bar size to stop the front from wanting to wash out. T
