great idea
Differential removal install, handy tool.
Thread Starter
Melting Slicks
Joined: Oct 2012
Posts: 2,156
Likes: 273
From: Dunedin NZ.
Differential removal install, handy tool.
I recently changed the differential over in my 70 and not having a transmission lifter I decided to fabricate a bracket that bolts to the top of the garage jack and the bottom of the diff to make changing the hefty lump easier by myself. The diff can be rotated 360 deg, it worked perfectly
You can tow the diff round the workshop quite well this way too.
You can tow the diff round the workshop quite well this way too.
Racer
Joined: Aug 2005
Posts: 355
Likes: 18
From: Corona Ca
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
Thread Starter
Melting Slicks
Joined: Oct 2012
Posts: 2,156
Likes: 273
From: Dunedin NZ.
Racer
Joined: Jul 2013
Posts: 307
Likes: 19
From: Kirkland WA
I remember carrying a 327 shortblock assy across the garage by hand when I was 20. It was great being immortal for awhile. Now I'll take all the cheats I can find, I paid my dues already!
Racer
Joined: Aug 2005
Posts: 355
Likes: 18
From: Corona Ca
Done the workouts with the 4 speeds (Top Loaders and Muncies) and autos (lotsa GM's).
Still hate doing Chevy V8 factory Delco full sized starters. Make an adaptor for those that you can still get the bolts thru the starter and into the block, and I'd use it.
Or at least copy the hell out of it
Still hate doing Chevy V8 factory Delco full sized starters. Make an adaptor for those that you can still get the bolts thru the starter and into the block, and I'd use it.
Or at least copy the hell out of it