SBC SWP Pullies
Thread Starter
Drifting
Joined: Sep 2007
Posts: 1,572
Likes: 51
From: Wichita Kansas
SBC SWP Pullies
I have looked for a set of chrome pullies for my 78 and when I read dicriptions it tells me they will not fit the Corvette SWP or trucks with 3/4" shaft.
I did poweder coat all my origional pullies in a silver color. However would prefer to have chrome steel.
I have a polished alumininum SWP and am thinking the only problem with installing the chrome set of steel pullies is the shaft dia. Does anyone know if this is the case?
The chrome pulley set I have found are for every other SBC with SWP.
I'm thinking they will work with the standard SBC SWP.
I did poweder coat all my origional pullies in a silver color. However would prefer to have chrome steel.
I have a polished alumininum SWP and am thinking the only problem with installing the chrome set of steel pullies is the shaft dia. Does anyone know if this is the case?
The chrome pulley set I have found are for every other SBC with SWP.
I'm thinking they will work with the standard SBC SWP.
Race Director
Joined: May 2006
Posts: 18,689
Likes: 2,571
Burning Brakes
Joined: Nov 2011
Posts: 1,170
Likes: 201
From: Willoughby Ohio
If you are willing to go with a 2 groove pulley you can get a billet pulley from cvf racing.They also sell a kit with crank,water pump and alternator pulleys,which is what I went with.Fit and finish is excellent and american made too.
