Crossfire TBI bushing service
Thread Starter
7th Gear
Joined: Jun 2005
Posts: 7
Likes: 0
From: Bay Saint Louis MS
Crossfire TBI bushing service
I need to have bushings installed on my 82 crossfire throttle shafts. I have searched and it looks like the two places that offered it in the past are out of business. Anyone know of anyplace reputable that still offers this service? Thanks in advance for any help
Melting Slicks
Joined: Apr 2009
Posts: 2,632
Likes: 112
From: Great Plains Iowa
Is DCS in Arizona still in business? If so they can do it because they re-bored and bushed and converted mine to 2.0" several years ago.
Thread Starter
7th Gear
Joined: Jun 2005
Posts: 7
Likes: 0
From: Bay Saint Louis MS
DCS is out of business but I spoke to one of the guys who is a member here via pm and he said they may reopen one of these days.
If I knew what I needed exactly the like size of ream and exact bushing to purchase I would consider doing it myself but I do not want to learn via trial and error. I have a drill press so I am confident I could do it if I had detailed information to draw upon.
Any idea what large carb companies might offer this?
If I knew what I needed exactly the like size of ream and exact bushing to purchase I would consider doing it myself but I do not want to learn via trial and error. I have a drill press so I am confident I could do it if I had detailed information to draw upon.
Any idea what large carb companies might offer this?
Melting Slicks
Joined: Mar 2006
Posts: 2,248
Likes: 67
From: Warrington PA
Finalist 2020 C4 of the Year - Unmodified
I haven't posted this info in the "sticky" yet.....
Try.....
Dan's Carburetor Service. 630-551-0595, Cell: 630-408-2743. Dan Squires 205 Willowwood Dr, Oswego, IL 60503.
Try.....
Dan's Carburetor Service. 630-551-0595, Cell: 630-408-2743. Dan Squires 205 Willowwood Dr, Oswego, IL 60503.
Race Director
Joined: Apr 2007
Posts: 11,152
Likes: 890
From: South Western Ontario
I'm thinking your TB uses a 3/8" shaft but you'd have to measure. The kit comes with a self guided reamer and bushings. Check youtube for videos of it being done.
As already posted, any half-decent carb rebuild place should be able to do it.
As already posted, any half-decent carb rebuild place should be able to do it.
