Dyeing the interior
Thread Starter
Pro
Joined: Jul 2002
Posts: 589
Likes: 8
From: Palm Bay FL
Dyeing the interior
I just started painting my interior, I bought the paint from ecklers. When I finished it look very dull not shiny. When you paint the interior is it OK to put ArmorALL on it to shine it up or should it be left alone? :confused:
Race Director
Joined: Apr 2002
Posts: 11,485
Likes: 1
From: Far side of the Moon
CI 4-5-6-7-8 Veteran
St. Jude '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-16-'17
Re: Dyeing the interior (mpro72vette)
You might try a coat or two of glossy clear enamel over the paint. That is what I did. :cheers:
Thread Starter
Pro
Joined: Jul 2002
Posts: 589
Likes: 8
From: Palm Bay FL
Re: Dyeing the interior (gb4622)
You might try a coat or two of glossy clear enamel over the paint. That is what I did. :cheers:
Thread Starter
Pro
Joined: Jul 2002
Posts: 589
Likes: 8
From: Palm Bay FL
Re: Dyeing the interior (Tex71BB)
I had the same thought when I did mine, but I don't think Armorall would be a good idea. Silicone and paint don't play well together.
Melting Slicks
Joined: Nov 2001
Posts: 2,214
Likes: 0
From: Casa Grande AZ
Re: Dyeing the interior (mpro72vette)
If you want a different sheen you could use SEM clear. You can get it in gloss or semi-gloss and it's made for the application. Try your local paint supply stores.
BTW- my personal preference is semi-gloss rather than dull or hi-gloss.
BTW- my personal preference is semi-gloss rather than dull or hi-gloss.
Le Mans Master
Joined: Jun 2002
Posts: 8,339
Likes: 24
From: I can walk to MA
Re: Dyeing the interior (mpro72vette)
Hey Mark ?
What are you doing, looking for cheap things to do to the vette, while you
save the pennies for the WS frame repairs ? Your interior was OK.
How did it turn out ?
Does the color of your new and old components match now ?
seeya :seeya
What are you doing, looking for cheap things to do to the vette, while you
save the pennies for the WS frame repairs ? Your interior was OK.
How did it turn out ?
Does the color of your new and old components match now ?
seeya :seeya
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
Pro
Joined: Jul 2002
Posts: 589
Likes: 8
From: Palm Bay FL
Re: Dyeing the interior (Daves_rusty_75)
Hey Mark ?
What are you doing, looking for cheap things to do to the vette, while you
save the pennies for the WS frame repairs ? Your interior was OK.
How did it turn out ?
Does the color of your new and old components match now ?
seeya :seeya
What are you doing, looking for cheap things to do to the vette, while you
save the pennies for the WS frame repairs ? Your interior was OK.
How did it turn out ?
Does the color of your new and old components match now ?
seeya :seeya
Le Mans Master
Joined: Jun 2002
Posts: 8,339
Likes: 24
From: I can walk to MA
Re: Dyeing the interior (mpro72vette)
Not to detract from your post - but the '70 frame is great (so far).
I found that the two frame rails had the end caps repaired just behind
the doors (usual place). I started to tackle the body mount bolts. The first
six (2 each #1 #2 #3) came out no problem - by hand - with my 1/2"
ratchet and a cheater bar. The #4s are spinning the nut in the inside cage.
I just haven't had the time to grind the heads off the bolts - but close to
raising the rear clip and inspecting the entire frame. Maybe this weekend,
but I have way to much work to do on my driver - rust holes needing
sheetmetal welded, then bondo and some paint == inspection sticker.
My buddy 73ken73 is interested in coming up some Saturday to check it
out, also. He just got his '73 back on the road. Maybe I can convince him to
drive it up from Peabody next weekend (9 days). We'll set something up.
Stay tuned ...
:seeya
I found that the two frame rails had the end caps repaired just behind
the doors (usual place). I started to tackle the body mount bolts. The first
six (2 each #1 #2 #3) came out no problem - by hand - with my 1/2"
ratchet and a cheater bar. The #4s are spinning the nut in the inside cage.
I just haven't had the time to grind the heads off the bolts - but close to
raising the rear clip and inspecting the entire frame. Maybe this weekend,
but I have way to much work to do on my driver - rust holes needing
sheetmetal welded, then bondo and some paint == inspection sticker.
My buddy 73ken73 is interested in coming up some Saturday to check it
out, also. He just got his '73 back on the road. Maybe I can convince him to
drive it up from Peabody next weekend (9 days). We'll set something up.
Stay tuned ...
:seeya
Burning Brakes
Joined: Aug 2000
Posts: 1,063
Likes: 0
From: Monument Colorado
Re: Dyeing the interior (mpro72vette)
I just had another thought. I recall when I did mine, most everything had a nice sheen to it, but some didn't. I found that I had been shooting on a hot, dry day and had held the can too far from the parts. The paint had actually partially dried before it hit the part. I went back over those again and they came out great. Just a thought.
