Horn Question - Easy Answer
Thread Starter
Instructor
Joined: Apr 2015
Posts: 238
Likes: 96
From: South Carolina
Horn Question - Easy Answer
I'd guess it's an easy answer.
Horn suddenly stopped working. However when pressing on the horn it does make a clicking noise so there is contact.
Where is the horn located and does that sound like a horn problem or a wiring problem?
With all the other repairs/work I'm doing on this car I have had very little time to do a step by step diagnosis on things like this. Thanks
Horn suddenly stopped working. However when pressing on the horn it does make a clicking noise so there is contact.
Where is the horn located and does that sound like a horn problem or a wiring problem?
With all the other repairs/work I'm doing on this car I have had very little time to do a step by step diagnosis on things like this. Thanks
Melting Slicks
Joined: Apr 2009
Posts: 2,632
Likes: 112
From: Great Plains Iowa
I'd guess it's an easy answer.
Horn suddenly stopped working. However when pressing on the horn it does make a clicking noise so there is contact.
Where is the horn located and does that sound like a horn problem or a wiring problem?
With all the other repairs/work I'm doing on this car I have had very little time to do a step by step diagnosis on things like this. Thanks
Horn suddenly stopped working. However when pressing on the horn it does make a clicking noise so there is contact.
Where is the horn located and does that sound like a horn problem or a wiring problem?
With all the other repairs/work I'm doing on this car I have had very little time to do a step by step diagnosis on things like this. Thanks
The clicking sound you are hearing is probably the horn relay and its possible the "out" contacts are corroded enough to prevent current flow. The horns are located right under the rear of the "nose" of the car just foreword of the two headlight actuators.
Team Owner
Joined: Jul 2006
Posts: 22,190
Likes: 4,178
From: Kannapolis NC
Still not putting the year of the car in your questions. Jumper 12v to the green horn wire MOMENTARILY. If the horn blows, you probably have a bad relay. More likely the horn has "frozen" up and won't blow when you put 12v on it. Another possibility, the horn is grounded by the mounting screw, it may be loose or corroded.
Instructor
Joined: Sep 2015
Posts: 216
Likes: 16
From: Haverfordwest Pembrokeshire
I had exact same problem and it was the contacts in the horn relay which were bad, a good clean and horn now works fine, probably didn't help that the cover was missing from the horn relay.
Good Luck
Graham
Good Luck
Graham
