Need some header pics and clearance help
Thread Starter
Racer
Joined: Jun 2011
Posts: 294
Likes: 5
From: Valdosta GA
Need some header pics and clearance help
THis is not conventional so bare with me. Rear mount turbo setup... Im looking to see if there are any headers that will allow enough room for a 2" cold air pipe from each turbo to go back to front of car. I have the front monospring so i dont thing going under the crossmember will work. It can either come up tight against firewall and go over headers or in front but i think PS pump will be in the way.... So if anyone has any pics they can share and what brand headers that would be a huge help....
Race Director
Joined: Jan 2000
Posts: 13,018
Likes: 2,262
From: Corsicana, Tx
2020 C2 of the Year - Modified Winner
2020 Corvette of the Year (performance mods)
C2 of Year Winner (performance mods) 2019
2017 C2 of Year Finalist
There's all sorts of room coming up through the "gill area". I stuck my two turbos in there with 3" outlet pipes.
JIM
JIM
