79 Tilt Steering Part Identification Needed
Thread Starter
Advanced
Joined: Dec 2007
Posts: 85
Likes: 0
From: Russellville AR
79 Tilt Steering Part Identification Needed
Hello, I am fixing the loose steering column issue by removing the steering column mechanism. I successfully was able to tighten and apply lock-tite on the four bolts. As I am getting close to putting everything back together, I have a left over part-- a spring looking piece.
I have the tilt and telescopic steering column.
Any help with pics in identifying the spring piece will be greatly appreciated.
Many Thanks... Sam
I have the tilt and telescopic steering column.
Any help with pics in identifying the spring piece will be greatly appreciated.
Many Thanks... Sam
Drifting
Joined: Jul 2002
Posts: 1,995
Likes: 110
From: Garland Texas
It goes under the rack. The rack is the aluminum part with all the teeth that connects the plastic gear from the tumbler to the ignition switch rod. The side with the shiny marks is the top side.
Mike
Mike
Thread Starter
Advanced
Joined: Dec 2007
Posts: 85
Likes: 0
From: Russellville AR
Sam
