Cylinder Heads
Melting Slicks
Joined: Jun 2016
Posts: 2,979
Likes: 332
From: Woodinville WA
World SR Torquer 170cc intake(The 2.02" Version): 220 CFM @ 0.500" on intake on a Superflow 1050; 232 CFM @ 0.0500 on a Superflow 600: $570. Heavy iron on the top of your engine block.
Jegs rebranded 180cc intake version of the Profiler heads; sand cast in Ohio; 2.02" valve: 263 CFM @ 0.600" $539 or $499 on sale. Aluminum. +30 to +40 CFM for a VERY small increase in cross-sectional area means that the average torque is going to be better than the Torquer, too.
The Torquer is an antique. Vortecs and GMPP FastBurns run circles around them if you want iron.
Adam
Jegs rebranded 180cc intake version of the Profiler heads; sand cast in Ohio; 2.02" valve: 263 CFM @ 0.600" $539 or $499 on sale. Aluminum. +30 to +40 CFM for a VERY small increase in cross-sectional area means that the average torque is going to be better than the Torquer, too.
The Torquer is an antique. Vortecs and GMPP FastBurns run circles around them if you want iron.
Adam
Last edited by NewbVetteGuy; Sep 11, 2018 at 01:39 PM.
