'82 fuse block removal ?
Thread Starter
Advanced
Joined: Mar 2016
Posts: 56
Likes: 2
From: Green Bay Wisconsin
'82 fuse block removal ?
Anybody know how to remove the fuse block and the connections from inside the engine bay?
I have the two screws out but cannot seem to remove the fuse block
I have the two screws out but cannot seem to remove the fuse block
Safety Car
Joined: Nov 2005
Posts: 3,532
Likes: 1,185
From: Arizona - If you don’t know CFI, STOP proliferating the myths around it...
Melting Slicks
Joined: May 2015
Posts: 2,365
Likes: 428
From: Cape Girardeau Missouri
If the same as my '79 there is a bolt (5/16"?) in the center of the fuse box connector on the engine side. It is a captive bolt--just loosen. The two screws on fuse box in the cabin secure the fuse box to the firewall. You do not have to remove them to remove the engine side connection--just loosen that bolt.
Thread Starter
Advanced
Joined: Mar 2016
Posts: 56
Likes: 2
From: Green Bay Wisconsin
If the same as my '79 there is a bolt (5/16"?) in the center of the fuse box connector on the engine side. It is a captive bolt--just loosen. The two screws on fuse box in the cabin secure the fuse box to the firewall. You do not have to remove them to remove the engine side connection--just loosen that bolt.
it's a 3/8 bolt....pretty darn close ...nice work. Thank you!
