Manual to Power Steering Conversion
#1
Drifting
Thread Starter
Manual to Power Steering Conversion
The following is concerning a 68. When converting to power steering does the relay rod need to be changed or can I add the power steering valves to ithe manual relay rod?
#2
Race Director
#3
Former Vendor
Member Since: Aug 2006
Location: Jeffersonville Indiana 812-288-7103
Posts: 76,656
Received 1,813 Likes
on
1,458 Posts
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
#4
Race Director
Member Since: Nov 2006
Location: Athens GA
Posts: 19,446
Received 351 Likes
on
304 Posts
St. Jude Donor '12-'13, '15- '16-'17-'18-'19, '21
Doesn't it also require the frame brace on the driver's side that the power ram connects to?
There is none on a manual setup....correct?
https://tse1.mm.bing.net/th?id=OIP.U...5&pid=3.1&rm=2
There is none on a manual setup....correct?
https://tse1.mm.bing.net/th?id=OIP.U...5&pid=3.1&rm=2