Washer Pump Polarity Question
05-24-2017, 02:55 PM
#1
Melting Slicks
Thread Starter
Washer Pump Polarity Question
For a '73, does it matter which terminal on the Washer Pump Solenoid receives the Yellow wire and which terminal hosts the Dark Blue?
PO deactivated it (taped up/spliced/etc.) for some reason,
, and I want it to work again.
Thanks much.
Steve
PO deactivated it (taped up/spliced/etc.) for some reason,
, and I want it to work again.Thanks much.
Steve
05-24-2017, 03:06 PM
#2
no matter which way the current flows through the coil the magnet is energized so for functional reasons it shouldn't make a difference
The following users liked this post:
Cavu2u (05-24-2017)
05-24-2017, 05:52 PM
#4
Former Vendor
Member Since: Aug 2006
Location: Jeffersonville Indiana 812-288-7103
Posts: 76,656
Received 1,813 Likes
on
1,458 Posts
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
Steve, Mel is right, the electromagnetic coil will work either way. But for those that are as **** as I am... the yellow wire goes to the left (driver side).
Ernie
The following users liked this post:
Cavu2u (05-24-2017)
