When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello,
Is there a secret to installing new slides into the center console shifter plate on a 72 C3?
Thanks
Dougtov
If it's the same as the 75 just unscrew the shifter *** and four screws that hold top plate. lift it enough to unplug the cig. lighter and one light. remove the plate, slide the old one out and the new one in. Easy 15 min. job.
RE: Plastic slides for 72 Shifter need to be installed as follows:
1. Sit in kitchen chair.
2. Place receiving console panel upside down on lap.
3. Insert BOTH PLASTIC SLIDES AT SAME TIME.
4. Reassembly console panel.
5. Have a beer!
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.