Rear end jacking point idea to share!
#1
Team Owner
Thread Starter
Rear end jacking point idea to share!
A while back someone posted an idea of putting a piece of channel iron from side to side. I posted this picture over 10 years ago.
Just make the bottom spring mount with a central post . Of course it could be made to fit between and under the differential exhaust system.
Just make the bottom spring mount with a central post . Of course it could be made to fit between and under the differential exhaust system.
The following users liked this post:
Haggisbash (12-27-2017)
#4
Race Director
This is nice and wouldn't hurt to have this for a quick lift of the rear to pull a tire etc...