Hurst T Handle threads
Thread Starter
Intermediate
Joined: Jan 2003
Posts: 36
Likes: 0
From: west chester pa
Hurst T Handle threads
Hey guys, I just purchased this for the M21 in my 1970. It doesn't seem to fit the threads on the shift lever. It's supposed to be "universal" and comes with literally 13 thread adapters, but none of them fit my shifter. Unbelievable.
Hoping someone's run into this, and can help me with which thread adapter/reducer I need. Thanks very much!
https://www.holley.com/products/driv.../parts/1530020
Hoping someone's run into this, and can help me with which thread adapter/reducer I need. Thanks very much!
https://www.holley.com/products/driv.../parts/1530020
Had a 1976 L-82, 4-sp
Joined: Mar 2011
Posts: 5,338
Likes: 1,210
From: Some days your the dog and some days your the hydrant.
Royal Canadian Navy
"Incredibly simple to install." Guess it's not as advertised. I would like an answer to your question also and how the reverse lockout is handled.
Pro
Joined: Mar 2014
Posts: 529
Likes: 113
From: Texas
I think the thread is 55/64 not 9/16. Been a while, working with a C3 with OEM shifter other than changing it out for a Hurst. Most people upgrade to a Hurst Comp. I thinking it may be 9/16 but has a recessed cut into the handle. Maybe someone who has replaced one recently will chime in.
Last edited by Gunfighter13; Apr 26, 2019 at 02:01 PM.
Is my vette stock?? HAHA
Joined: Oct 2015
Posts: 20,098
Likes: 9,229
From: Im not allowed to tell you
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
I've had a few issues like this recently and rethread the adapters to fit the shift lever. Just find one of them that has a similar but smaller size hole and relatively close threads so you arent removing too many threads or metal
Thread Starter
Intermediate
Joined: Jan 2003
Posts: 36
Likes: 0
From: west chester pa
Thanks for they replies. Seems that this would be easily fixed with the correct thread adapter, if I could determine what these two threads are: 1) top of the shift lever, and 2) inside the Hurst shifter T handle. I have thread gauges but they only go up to 1/2 inch, which is too small. Same with my taps - I have nothing over 1/2 inch.
resdoggie, the handle just sits on top of the shift lever, like the original shift ****. It doesn't seem like it would interfere with the reverse lockout.
resdoggie, the handle just sits on top of the shift lever, like the original shift ****. It doesn't seem like it would interfere with the reverse lockout.
