Air induction 75' Coupe
Thread Starter
Intermediate
Joined: Nov 2018
Posts: 48
Likes: 5
From: Maryland
Air induction 75' Coupe
Hey Folks!
I am now moving to underside of Rubys hood to start cleaning things and sorting things out and one of the first things I want to tackle is the air induction stuff.
I am currently running the stock L-48 350 that came in the car. The carburetor has been changed to an Edelbrock 1405 600CFM carb and is sitting on an Edelbrock intake (not sure what model).
I have heard that when changing air cleaners that you really have to pay attention to hood clearance. To that point, and being that I want to replace the instake manifold, what manifold and cleaner would you seasoned pros recommend to use with the 1405 carb?
I don't need to break the bank, just want to get fuel and air moving better and get rid of the NASTY little Edelbrock triangle thing that's on there now .
Thanks in advance!!
R/
Darrin AKA: c3cpo
I am now moving to underside of Rubys hood to start cleaning things and sorting things out and one of the first things I want to tackle is the air induction stuff.
I am currently running the stock L-48 350 that came in the car. The carburetor has been changed to an Edelbrock 1405 600CFM carb and is sitting on an Edelbrock intake (not sure what model).
I have heard that when changing air cleaners that you really have to pay attention to hood clearance. To that point, and being that I want to replace the instake manifold, what manifold and cleaner would you seasoned pros recommend to use with the 1405 carb?
I don't need to break the bank, just want to get fuel and air moving better and get rid of the NASTY little Edelbrock triangle thing that's on there now .
Thanks in advance!!
R/
Darrin AKA: c3cpo
Last edited by c3cpo; Jul 1, 2019 at 01:00 PM. Reason: Spelling
