Thoughts on this as a replacement engine?

Reply Subscribe

Thread Tools

Search this Thread

Nov 20, 2002 | 01:32 PM

Captain_Kaboom

Thread Starter

Racer

Joined: Jan 2002

Posts: 488

Likes: 0

From: Woodstock GA

Thoughts on this as a replacement engine?

Hey all,
Found this block on eBay- NOT going to go thru eBay, but I contacted D&J MACHINE & PERFORMANCE ENGINES directly.

http://<a href="http://cgi.ebay.com/...872711929?</a>

Anyone have experience with these people?

Any idea of what else I'll have to change out when replacing my stock L48?

Thanks!

Nov 20, 2002 | 01:51 PM

Alwyn678

Team Owner

Joined: Jun 2001

Posts: 43,136

Likes: 155

From: Thomson Georgia

Re: Thoughts on this as a replacement engine? (Captain_Kaboom)

Sounds like a decent setup but as with anything off Ebay

Caveat emptour :cheers: :yesnod:

Nov 20, 2002 | 02:06 PM

Mystery Machine

Drifting

Joined: Jul 2002

Posts: 1,855

Likes: 0

From: Cocoa Beach FL

Re: Thoughts on this as a replacement engine? (Captain_Kaboom)

Be careful. I don't know what your budget is but you can get some great deals from some reputable organizations such as:

http://cgi6.ebay.com/ebaymotors/ws/e...ns%40erols.com

or a Crate motor from any GM dealer.

Just my .02 probably not worth too much. :rolleyes:

Nov 20, 2002 | 03:11 PM

joe73vette

Melting Slicks

Joined: Dec 2000

Posts: 2,198

Likes: 2

From: Eastern Connecticut

Re: Thoughts on this as a replacement engine?

Since it doesn't say, assume cast pistons. It looks like a $1500 motor at most, regardless of what he says. Those old heads aren't that good any more, but were good 40 years ago. I have been fretting over what to do with my motor for a while. As a benchmark, you can get a new 350HO crate motor from scoggin-dickey for $2112 until Nov 30. I am considering getting their modified vortec head kit that includes a performer intake for $900, plus a grand to rebuild my motor. Go to the chevyhighperformance websites and look at their cylinder head comparison articles. You should also look at their goodwrench 350 buildup series. You didn't say what your goals are for this swap, but you shouldn't get into "parts envy" for a street motor. Joe

Nov 20, 2002 | 03:53 PM

fauxrs

Le Mans Master

Joined: Nov 1999

Posts: 5,768

Likes: 3

From: San Diego CA

Re: Thoughts on this as a replacement engine? (Captain_Kaboom)

A new 350 block witha .030 bore - why did he bore out a "new" block? if its as new as the other parts - are we talking a "New" crank or a reground "old" crank, are the rods "new" or resized originals - you get my point - I dont think foe $2500 you could buy all of that "New" - he bought the short from a machine shop - I'd be willing to bet that most of that shorts internals are reground, resized, repaired old parts - excepting the "New" pistons, rings,bearings,freeze plugs etc.... which I have no doubt are new - as to their quality - Who knows.

I'm a little too pessimistic about claims of engine parts - or anything on e-bay for that matter. If he cant fax you reciepts or a list of the mfrs of the internals -I wouldnt touch it with a 10' pole.

Nov 20, 2002 | 03:59 PM

Captain_Kaboom

Thread Starter

Racer

Joined: Jan 2002

Posts: 488

Likes: 0

From: Woodstock GA

Re: Thoughts on this as a replacement engine? (joe73vette)

Wow, that looks like a good idea. Do you have any idea of what else I would need to purchase to get this in my '77? I mean, can I use all my old stock intake, water pump, etc? I don't want to buy an engine then spend another $600 on the other stuff- or do I have to?

http://www.sdpc2000.com/cart.asp?act...id=120&pid=115

Thanks, great suggestion!

Reply Subscribe