70 rocker moldings with tab
Thread Starter
Instructor
Joined: Feb 2015
Posts: 143
Likes: 4
70 rocker moldings with tab
Does anyone know where to get the correct rocker moldings with the bottom tab on them for a 70? Ecklers had pictures of them on their on line catalog but when they arrived they did not have them. They agreed to pay to ship them back and refund the shipping I paid. I ordered some from Corvette Central over the phone. They assured me they had the tabs but would not be available until March 12: That was fine and I ordered them. I received a call from them yesterday and they said they have been discontinued. I have not found anyone else that carries them. Also does anyone know who has good power window motors for sale? Thanks!
Melting Slicks
Joined: May 2002
Posts: 2,476
Likes: 756
From: Laporte, IN
They are pricey but that is what happens with items that have a short run.
https://www.ebay.com/itm/Corvette-Or...wAAOSwZGxf4RtE
https://www.ebay.com/itm/Corvette-Or...wAAOSwZGxf4RtE
Melting Slicks
Joined: Mar 2010
Posts: 2,270
Likes: 375
From: Randolph nj
even with the bubble wrap and a cardboard cylinder there were minor dents and gouges ,, tool marks all over them ,, it was not from shipping it was from manufacturing ,, bare aluminum no coating ,,
I went on ebay last night and found the ones with the tabs and it even warned in the ad that they were blems but they sold 67 pairs at 200.00 a pop
I went on ebay last night and found the ones with the tabs and it even warned in the ad that they were blems but they sold 67 pairs at 200.00 a pop
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Apr 2010
Posts: 2,315
Likes: 164
From: Broadview hts Ohio
moldings
I would guess.
Originals with no damage, $500 pair based on what used and repop's cost. I would think to find these they would be early take offs as the moldings w/tabs were never available over the counter from GM. This is why you never see NOS moldings in the wrappers.
Joe
Originals with no damage, $500 pair based on what used and repop's cost. I would think to find these they would be early take offs as the moldings w/tabs were never available over the counter from GM. This is why you never see NOS moldings in the wrappers.
Joe
Melting Slicks
Joined: Mar 2010
Posts: 2,270
Likes: 375
From: Randolph nj
if i were to buy them now i would look for singles left and right and lots of detailed pictures you will spend less in the end no where near 500 .,,,,, 200 -250 max for good decent looking rockers ,, i actully fixed mine with alumiloy and they look great
