ISO distributor rebuilder
Thread Starter
Burning Brakes
Joined: Jun 2004
Posts: 1,186
Likes: 21
From: West Tennessee
ISO distributor rebuilder
I am looking for a shop/individual to rebuild a distributor for a 71 LS5. I know the tach gear/main shaft is stripped, and possibly the lower bushing worn.
Any suggestions?
Any suggestions?
Team Owner
Joined: Mar 2002
Posts: 44,698
Likes: 1,835
From: Huntsville AL
From the NCRS forum
Jerry MacNeish at http://z28camaro.com/
Don Baker @ 815-210-3057...he's rebuilt thousands of these units.
Steve Newsom of Northwest Florida Distributor Service. d64sln@gmail.com; 850-776-7334.
Jerry MacNeish at http://z28camaro.com/
Don Baker @ 815-210-3057...he's rebuilt thousands of these units.
Steve Newsom of Northwest Florida Distributor Service. d64sln@gmail.com; 850-776-7334.
Le Mans Master
Joined: Feb 1999
Posts: 8,351
Likes: 75
From: Tampa Bay FL
Lars used to rebuild the non-HEI distributors but not sure if he still does. I sent my 1969 L46 distributor and he did a fine job. About that time, he had announced no more distributor rebuilds but I cannot say if that has changed. That was over 10 years ago...
