One brake light out.
Thread Starter
Racer
Joined: Dec 2012
Posts: 315
Likes: 91
One brake light out.
So only my passenger side brake light is out. The blinkers and parking all work fine. Someone suggested my turn signal switch could be bad. Any thoughts?
wrong forum. Please delete.
wrong forum. Please delete.
Last edited by Grmvettes; Jul 3, 2021 at 11:11 AM. Reason: Wrong forum
Advanced
Joined: Feb 2013
Posts: 56
Likes: 14
From: Spokane WA
Turn on your hazard lights. The hazards are on the same circuit as the brake lights. Turn signals and parking lights are on the same circuit and separate from the brake lights. Usually it's a bulb out. Should be part number 1157. If it's not the bulb then you will need a test light to determine if there is power to the socket and if the ground is good.
Is my vette stock?? HAHA
Joined: Oct 2015
Posts: 20,174
Likes: 9,298
From: Im not allowed to tell you
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
Make sure you put it in correctly, the slots and tabs on the bayonet cap are made so i will only go in one way , but if you force it. you can get it in the wrong way and the electrodes will not line up correctly
