Top End Kit Recommendations 73 350
Thread Starter
Instructor
Joined: Jun 2021
Posts: 213
Likes: 45
From: Georgia
Top End Kit Recommendations 73 350
Hi everyone.
I’m looking at top end kits and would like some recommendations please.
I’m looking for a kit with the following.
Cam
Timing Chain
Heads
Intake
So basically a full top end kit.
Thanks in advance for any recommendations.
Eric
I’m looking at top end kits and would like some recommendations please.
I’m looking for a kit with the following.
Cam
Timing Chain
Heads
Intake
So basically a full top end kit.
Thanks in advance for any recommendations.
Eric
Melting Slicks
Joined: Oct 2013
Posts: 2,569
Likes: 126
From: San Diego California
Same thoughts as you Eric. My '73 L48 needed changing too.
I was lucky. Have a very good friend who had a '76 C-10 Block (4-bolt Main) that she didn't want to move with her hubby and all to Colorado, but she really knew I wanted to make a 383 out of it so she gave it to me. Bought a balanced kit from White Bros. Scat Crank, Probe Pistons that had the craziest pin holders I ever saw, not sure offhand who made the rods but they were radical too. MCT Street Cam, Dart Heads, Edelbrock Performer, 2.5 inch X-over exhaust installed. Just added an EFI system by FiTech that puts the Rochester to shame. She GOs now Eric. Currently changing out the TH400 for an M20. Kinda never-ending.
But it's sorta therapy for my motor-head too.
But I had the time, space, and resources to do all this. If you do too Eric, I suggest you go for it. Was sure worth it to me.
Hope the names help.
Steve
I was lucky. Have a very good friend who had a '76 C-10 Block (4-bolt Main) that she didn't want to move with her hubby and all to Colorado, but she really knew I wanted to make a 383 out of it so she gave it to me. Bought a balanced kit from White Bros. Scat Crank, Probe Pistons that had the craziest pin holders I ever saw, not sure offhand who made the rods but they were radical too. MCT Street Cam, Dart Heads, Edelbrock Performer, 2.5 inch X-over exhaust installed. Just added an EFI system by FiTech that puts the Rochester to shame. She GOs now Eric. Currently changing out the TH400 for an M20. Kinda never-ending.
But it's sorta therapy for my motor-head too.But I had the time, space, and resources to do all this. If you do too Eric, I suggest you go for it. Was sure worth it to me.
Hope the names help.
Steve
