69 Removable Rear Window Gasket Installation
Thread Starter
Melting Slicks
Joined: Dec 2000
Posts: 3,363
Likes: 303
From: Lansdale 19446 PA
2024 C3 of the Year Finalist- Unmodified
St. Jude Donor '10-'11, '15, '19
69 Removable Rear Window Gasket Installation
Well, I have reassembled most of my 69 after paint and now it is time to install the rear window gasket. Does the latching hardware get installed before or after the gasket is installed!!
Other than being double jointed, any other suggestions! LOL
Thanks
Other than being double jointed, any other suggestions! LOL
Thanks
Last edited by Go Vette Go; Aug 8, 2021 at 01:49 PM. Reason: Spelling
Thread Starter
Melting Slicks
Joined: Dec 2000
Posts: 3,363
Likes: 303
From: Lansdale 19446 PA
2024 C3 of the Year Finalist- Unmodified
St. Jude Donor '10-'11, '15, '19
The answer
Got the answer from my good friend Brian at Bair's Corvettes:
"Put the latches on, so when you install the gasket you can snap the rear window in to hold it in till the glue sets up."
"Put the latches on, so when you install the gasket you can snap the rear window in to hold it in till the glue sets up."
