Wilson6t7

I am looking for a 5 inch speedo [160 mph] and tach [8k RPM]. Whiteface only. And the littler info gauges. Pics would be good. Looking for my Camaro. Thanks guys,

Steve

GrandSportC3

Here are pics of my Autometer Phantom gauges in my 68'!




I used the 5" 200 mph speedo and 5" 10k rpm tach...
The center gauges are 2 1/16..

I got them gauges at Summit...

:cheers:

Olivier

groovyjay

I installed set of AM Ultra Lites in my car. I have 5" 200mph speedo and 10K Tach. I also have 5 gauges mounted in the center panel. For these I used 2 5/8" gauges.

Here's the picture:


Here's more:
http://forums.corvetteforum.com/zerothread?id=456294

:cheers:

phoenix

Here are a bunch more from different vendors. I put together a list of gauge manufacturers that have components that will fit. THere are more out there than the Autometers. :):)
http://forums.corvetteforum.com/zerothread?id=453833

Hope that it helps.

Wilson6t7

Those are nice guys but my car only rev's to maybe 6000, I dont really want a 10grand tach. Any 8's out there? I really like the look tho GrandSport...

GrandSportC3

I don't think that Autometer has a 8k RPM version of those tachs... I also just responded to your IM!! :seeya :seeya

:cheers:

Olivier

spikezz4

Guys, you can get as many as dight (8) AM 25/8" gauges in the center console. We did it. However, it had a porcupine look; bruissling with guages.

Consequently, panel #4 will now have the speed/tach and 4 21/16" gauges in a 78-82 panel, with a custom intrument panel with the other 4 25/8" gauges. The drivers side will look much like the new C5 panels once finished.
Spike

dukvet76

Does anyone have instructions on putting these Autometer Phantom Gauges in 68-76 dashes?

GrandSportC3

I've posted instructions before.. Just make a forum search for Autometer in the C3 section.. If you don't find it - I can post my instructions again..

:cheers:

Olivier