Anyone have Autometer's or aftermarket gauges?
#1
Race Director
Thread Starter
Member Since: Jan 2002
Location: BC
Posts: 12,246
Likes: 0
Received 0 Likes
on
0 Posts
Anyone have Autometer's or aftermarket gauges?
I am looking for a 5 inch speedo [160 mph] and tach [8k RPM]. Whiteface only. And the littler info gauges. Pics would be good. Looking for my Camaro. Thanks guys,
Steve
Steve
#2
Team Owner
Re: Anyone have Autometer's or aftermarket gauges? (Micky T)
Here are pics of my Autometer Phantom gauges in my 68'!
I used the 5" 200 mph speedo and 5" 10k rpm tach...
The center gauges are 2 1/16..
I got them gauges at Summit...
:cheers:
Olivier
I used the 5" 200 mph speedo and 5" 10k rpm tach...
The center gauges are 2 1/16..
I got them gauges at Summit...
:cheers:
Olivier
#3
Re: Anyone have Autometer's or aftermarket gauges? (GrandSportC3)
I installed set of AM Ultra Lites in my car. I have 5" 200mph speedo and 10K Tach. I also have 5 gauges mounted in the center panel. For these I used 2 5/8" gauges.
Here's the picture:
Here's more:
http://forums.corvetteforum.com/zerothread?id=456294
:cheers:
Here's the picture:
Here's more:
http://forums.corvetteforum.com/zerothread?id=456294
:cheers:
#4
Melting Slicks
Re: Anyone have Autometer's or aftermarket gauges? (groovyjay)
Here are a bunch more from different vendors. I put together a list of gauge manufacturers that have components that will fit. THere are more out there than the Autometers. :):)
http://forums.corvetteforum.com/zerothread?id=453833
Hope that it helps.
http://forums.corvetteforum.com/zerothread?id=453833
Hope that it helps.
#5
Race Director
Thread Starter
Member Since: Jan 2002
Location: BC
Posts: 12,246
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone have Autometer's or aftermarket gauges? (phoenix)
Those are nice guys but my car only rev's to maybe 6000, I dont really want a 10grand tach. Any 8's out there? I really like the look tho GrandSport...
#6
Team Owner
Re: Anyone have Autometer's or aftermarket gauges? (Micky T)
Those are nice guys but my car only rev's to maybe 6000, I dont really want a 10grand tach. Any 8's out there? I really like the look tho GrandSport...
:cheers:
Olivier
#7
Pro
Member Since: Apr 2000
Location: The Villages FL
Posts: 625
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone have Autometer's or aftermarket gauges? (Micky T)
Guys, you can get as many as dight (8) AM 25/8" gauges in the center console. We did it. However, it had a porcupine look; bruissling with guages.
Consequently, panel #4 will now have the speed/tach and 4 21/16" gauges in a 78-82 panel, with a custom intrument panel with the other 4 25/8" gauges. The drivers side will look much like the new C5 panels once finished.
Spike
Consequently, panel #4 will now have the speed/tach and 4 21/16" gauges in a 78-82 panel, with a custom intrument panel with the other 4 25/8" gauges. The drivers side will look much like the new C5 panels once finished.
Spike
#9
Team Owner
Re: Anyone have Autometer's or aftermarket gauges? (dukvet76)
Does anyone have instructions on putting these Autometer Phantom Gauges in 68-76 dashes?
:cheers:
Olivier