Look at this pic...Power Brake MC or not?
#1
Melting Slicks
Thread Starter
Member Since: Oct 2002
Location: Manalapan FL
Posts: 3,255
Likes: 0
Received 0 Likes
on
0 Posts
Look at this pic...Power Brake MC or not?
Can anyone tell by looking at this pic if this MC is for a power-brake application?
Thanks in advance,
D. Ocean
Miami, FLA
Thanks in advance,
D. Ocean
Miami, FLA
#2
Instructor
Member Since: Feb 2000
Location: Snohomish, WA. USA
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Re: Look at this pic...Power Brake MC or not? (74FLCONV)
I believe the only difference between a power brake and manual brake master cylinder is the diameter of the internal cylinder and piston, so there is no way to tell from the outside.
#4
Melting Slicks
Member Since: May 2000
Location: Crescent City, CA
Posts: 2,125
Likes: 0
Received 6 Likes
on
5 Posts
Re: Look at this pic...Power Brake MC or not? (74FLCONV)
that looks like one of the ebay ones.
NAPA sells them rebuilt for about $33 with a $4 core charge. Why take the chance?
Terry
NAPA sells them rebuilt for about $33 with a $4 core charge. Why take the chance?
Terry
#5
Melting Slicks
Thread Starter
Member Since: Oct 2002
Location: Manalapan FL
Posts: 3,255
Likes: 0
Received 0 Likes
on
0 Posts
Re: Look at this pic...Power Brake MC or not? (trw)
that looks like one of the ebay ones.
NAPA sells them rebuilt for about $33 with a $4 core charge. Why take the chance?
Terry
NAPA sells them rebuilt for about $33 with a $4 core charge. Why take the chance?
Terry
Thanks for the prompt responses,
D. Ocean
Miami, FLA