What are these heads ?
Thread Starter
Heel & Toe
Joined: Jan 2024
Posts: 15
Likes: 0
From: England
What are these heads ?
I'm planning on purchasing new heads for my 357 and I look around here and there in case there is any good used deals (which in the UK is very sparse) I have seen these and it isn't clear what they are or their spec. There is a number I can see on the head but cant seem to find much on it. I have spoken to the seller and he said he will try and find out. Just wanted to see if anyone here can tell me ?
https://www.ebay.co.uk/itm/285581801...4aAvuXEALw_wcB
https://www.ebay.co.uk/itm/285581801...4aAvuXEALw_wcB
Dr. Detroit
Joined: Mar 2012
Posts: 10,097
Likes: 4,027
From: New Braunfels Texas
GM Bow Tie "049" heads......and they are beat to ****. One chamber has had a piston come apart on it and it appears they just smoothed it off and ran it.......these have a very tall port, difficult to seal an intake up to (Edelbrock makes a specific intake for this pt#2814).
I would pass.
Jebby
I would pass.
Jebby
Drifting
Joined: Jul 2022
Posts: 1,359
Likes: 822
From: Wisconsin
2024 C3 of the Year Finalist- Modified
2023 C3 of the Year Finalist - Modified
2022 C3 of the Year Finalist - Modified
I lived in England for 12 years, there was a place in Red Hill called American autoparts. They've been there since the 1970s. Try googling them.
Thread Starter
Heel & Toe
Joined: Jan 2024
Posts: 15
Likes: 0
From: England
GM Bow Tie "049" heads......and they are beat to ****. One chamber has had a piston come apart on it and it appears they just smoothed it off and ran it.......these have a very tall port, difficult to seal an intake up to (Edelbrock makes a specific intake for this pt#2814).
I would pass.
Jebby
I would pass.
Jebby
