Key release
Thread Starter
Instructor
Joined: Nov 2018
Posts: 193
Likes: 70
From: Chicago
Key release
The silver lever (image for reference) on my 1970 will not move (wiggles about 1/4"). I have the cable removed, and I still cannot get this to move, so I can remove the key from the ignition. Thoughts
Race Director
Joined: Nov 2006
Posts: 13,151
Likes: 7,765
From: Sunshine Coast, Queensland, Australia
2025 C3 of the Year Finalist - Modified
2024 C3 of the Year Finalist- Modified
2022 C3 of the Year Finalist - Modified
Cruise-In VIII Veteran
I don't see your image but I'm pretty sure I know what your talking about.
try having a helper giggle the key back and forth from on and off while you try to move the lever in the engine bay.
If it still won't budge I guess you'll need to get into your column.
try having a helper giggle the key back and forth from on and off while you try to move the lever in the engine bay.
If it still won't budge I guess you'll need to get into your column.
Thread Starter
Instructor
Joined: Nov 2018
Posts: 193
Likes: 70
From: Chicago
The problem is that the lever will not move in the engine bay. I will still try the helper approach, but I have never had a C3 where this lever was frozen. I have prayed oil in it for days.
Thanks.
Thanks.
Race Director
Joined: Nov 2006
Posts: 13,151
Likes: 7,765
From: Sunshine Coast, Queensland, Australia
2025 C3 of the Year Finalist - Modified
2024 C3 of the Year Finalist- Modified
2022 C3 of the Year Finalist - Modified
Cruise-In VIII Veteran
Sounds like it's frozen/jambed in the column. Not all that hard to remove the ignition barrel. Just need to get behind the signal switch. Perhaps once that deep you could disconnect from the ignition barrel end.
