69 Vette clutch
Thread Starter
2nd Gear
Joined: May 2024
Posts: 2
Likes: 0
69 Vette clutch
Just got to the point of the first drive of my frame up, it seems the clutch is not disengaging with the pedal pushed. All the linkage looks right down to the clutch fork, and the pedal doesn't seem to have much tension. I know it is pushing the fork almost to touching the body floor pan. Any ideas? It did sit for a while with the motor married to the trans on the frame.
Melting Slicks
Joined: Sep 2016
Posts: 2,230
Likes: 984
From: Wauconda IL
Thread Starter
2nd Gear
Joined: May 2024
Posts: 2
Likes: 0
What clutch brand: https://www.corvetteforum.com/forums...vel-range.html
Race Director
Joined: Nov 2006
Posts: 13,246
Likes: 7,837
From: Sunshine Coast, Queensland, Australia
2025 C3 of the Year Finalist - Modified
2024 C3 of the Year Finalist- Modified
2022 C3 of the Year Finalist - Modified
Cruise-In VIII Veteran
Could just be a stuck clutch. Common if they sit awhile. Put it in gear and start it. Start driving forward. Usually will pop free in a few feet. Sometimes a lot longer. Once it does. It's fine.
