Fresh Air Vents
Thread Starter
Instructor
Joined: Oct 2021
Posts: 153
Likes: 36
From: West Virginia
Fresh Air Vents
In the process of removing the fresh air vent flaps in order to replace the gaskets. I’m having a hard time getting the spring pin to pull in order to remove them from the housing. Has anyone replaced these before? Any tricks?
Instructor
Joined: Jul 2022
Posts: 206
Likes: 38
From: White Bear Lake, MN
I don't know if you tried this but I used a small flat blade screwdriver inserted between spring coils to press up or down, depending on the side, which worked well. On one side I had to use needle nose pliers to pull the pin with the spring away from the hole. The biggest problem was getting both hands and the tools into the small space.
Hope this helps.
Hope this helps.
