Team G intake?
Thread Starter
Racer
Joined: May 2000
Posts: 452
Likes: 0
From: Oak Hill, VA 20171
Team G intake?
Anybody using an aluminum Team G intake? I have a freind who has one for sale at a great price, but I dont know a thing about them. Good? Bad?
Now that my motor is apart, I'm rethinking what to put back on it.
Now that my motor is apart, I'm rethinking what to put back on it.
Team Owner
Joined: Apr 1999
Posts: 21,953
Likes: 1,444
From: Reno Nevada
2024 C3 of the Year Finalist- Modified
Re: Team G intake? (dlw)
What number is it? When ever your putting together a motor you have to buy intakes that gasket match the heads. The single plane Team-G's are made for big heads with FelPro 1206 or larger intakes.
I use the Wieand 7532 Air gap single plane. The 7530 is also a 1206 size
I use the Wieand 7532 Air gap single plane. The 7530 is also a 1206 size
Safety Car
Joined: Jun 2002
Posts: 4,844
Likes: 0
From: Pearland TX
St. Jude Contributor
Re: Team G intake? (gkull)
Good post gkull...
I wonder how many people really do research before they buy an intake manifold that may or may not work with their heads. I have the Team-G 7530 single plane intake with the Dart 200cc heads, but did not make that purchase until I went through everything that Dart recommended and contacted some of the high performance parts places to confirm it. And I am using the Felpro 1205 intake manifold gaskets with this set-up.
I wonder how many people really do research before they buy an intake manifold that may or may not work with their heads. I have the Team-G 7530 single plane intake with the Dart 200cc heads, but did not make that purchase until I went through everything that Dart recommended and contacted some of the high performance parts places to confirm it. And I am using the Felpro 1205 intake manifold gaskets with this set-up.
Team Owner
Joined: Apr 1999
Posts: 21,953
Likes: 1,444
From: Reno Nevada
2024 C3 of the Year Finalist- Modified
Re: Team G intake? (bgrice)
Bgrice - Your 7530 matches and 200 cc 1205? I used to have some hogged out 186 casting Double humps at 1205. I've just never seen the 200cc Dart heads. The big thing is you can never have small heads on a big intake or big intake on small heads.
Safety Car
Joined: Jun 2002
Posts: 4,844
Likes: 0
From: Pearland TX
St. Jude Contributor
Re: Team G intake? (dlw)
dlw....
Holley/Weiand make some great intake manifolds for high performance applications. Like gkull suggested... just making sure you have the correct match is what is important. I wouldn't think twice and would buy in a second if I found a good deal on one of their intakes. I ran one on my SuperGas doorslammer a few years ago by the way. It was a BBC 468 13.5:1 motor, but still looking for more horsepower.
gkull...
The 1205 Felpro gaskets and single plane intake are what Dart suggest with the 200cc heads. Here's the link:
http://www.dartheads.com/sbiron200.htm
Holley/Weiand make some great intake manifolds for high performance applications. Like gkull suggested... just making sure you have the correct match is what is important. I wouldn't think twice and would buy in a second if I found a good deal on one of their intakes. I ran one on my SuperGas doorslammer a few years ago by the way. It was a BBC 468 13.5:1 motor, but still looking for more horsepower.
gkull...
The 1205 Felpro gaskets and single plane intake are what Dart suggest with the 200cc heads. Here's the link:
http://www.dartheads.com/sbiron200.htm
