Jim Shea Papers
Thread Starter
Intermediate
Joined: Dec 2001
Posts: 40
Likes: 2
From: Bay City MI
Jim Shea Papers
I have seen numerous referrals to steering column guidance by Jim Shea. I have yet to find a link that works. Anyone out there have a working link. I am rebuilding a tilt tele column and having problems with the ignition switch rod bottoming out on the transmission control lock tube housing. There is a boss that on the inside of the housing that travels about 45 degrees. The rod hits it and does not allow the ignition switch rack to travel far enough to allow the removal of the key.
Thanks
Thanks
Melting Slicks
Joined: Feb 2007
Posts: 2,709
Likes: 269
From: S.E. MI
St. Jude Donor '15
https://www.corvetteforum.com/forums...m_content=post
Comment #7 has the files that can be downloaded
Comment #7 has the files that can be downloaded
Le Mans Master
Joined: Nov 2016
Posts: 9,235
Likes: 943
From: Lake Tahoe, CA
Just asked X/Grok about your issue here's a link to the response.
https://x.com/i/grok/share/5311ab554c324d90a2a1d02709f5d592
https://www.valleyvettes.ca/technical/C3/ttcolumndr_1rev21mr2009.pdf
https://x.com/i/grok/share/5311ab554c324d90a2a1d02709f5d592
https://www.valleyvettes.ca/technical/C3/ttcolumndr_1rev21mr2009.pdf
Last edited by caskiguy; Yesterday at 02:09 PM.
