Heater Hose
Thread Starter
Instructor
Joined: Mar 2003
Posts: 162
Likes: 0
From: Niagara Falls Ontario
Heater Hose
Is there a 90 degree fitting for the heater hose that comes out of the intake manifold the origonal one comes straight up from the new manifold i put on and the hose has to do a 90 degee turn and i don,t trust it breaking prematurally .I am talking about the screw in 1/2 inch fitting . Dave :auto:
Race Director
Joined: Jun 2001
Posts: 16,483
Likes: 1
From: The Only Corvette in Gila Bend, Az.
St. Jude Donor '09
Re: Heater Hose (74BBcherryred)
Sounds like the part you need might be found at your local Home Depot.
Just get the correct thread size, and you will be all set. :seeya
Just get the correct thread size, and you will be all set. :seeya
Team Owner
Joined: Sep 2000
Posts: 65,981
Likes: 15
Re: Heater Hose (74BBcherryred)
You would be amazed at all the weird shaped heater hoses behind the parts counter at Autozone. I don't know how well you know them, but if they would let you just rummage behind the counter, I'm sure they would have a hose that you could buy to cut a 90 degree elbow from.
