WILL IT FIT?
Thread Starter
Instructor
Joined: Jan 2003
Posts: 129
Likes: 0
From: Ontario ca
WILL IT FIT?
Hi everyone i was just wondering if i could get a performer rpm intake manifold to fit under my stock 69 hood? the carb i am using is a holley spreadbore double pumper with mechanical secondaries list number is 6210
oh and if the performer rpm will fit under a stock hood then how about the air gap rpm. the hood is just the sock hood that came with the 350 so if any one could tell me what my options are as far as manifolds go it would be greatly aprecieated
thanks! :seeya
oh and if the performer rpm will fit under a stock hood then how about the air gap rpm. the hood is just the sock hood that came with the 350 so if any one could tell me what my options are as far as manifolds go it would be greatly aprecieated
thanks! :seeya
Le Mans Master
Joined: Jun 2002
Posts: 8,339
Likes: 24
From: I can walk to MA
Re: WILL IT FIT? (Randexter)
I have a performer under the stock small block hood - no problem.
I have read on the forum that the air-gap will not swap in.
Perhaps with a lower dropped air cleaner base - you could make it work.
Good Luck. :seeya
I have read on the forum that the air-gap will not swap in.
Perhaps with a lower dropped air cleaner base - you could make it work.
Good Luck. :seeya
