Need info on 75 L-82
Race Director
Joined: Apr 1999
Posts: 15,148
Likes: 477
From: NM
Re: Need info on 75 L-82 (gtr1999)
Gary,
Take a look here, I list the config for the '73 L82. The 75 would have the same except for the exhaust (plus carb tuning and HEI ignition tuning which results in a lower hp rating for the '75):
http://www.corvetteforum.net/c3/vette73/compair.htm
tom...
[Modified by Tom73, 11:48 AM 3/17/2003]
Take a look here, I list the config for the '73 L82. The 75 would have the same except for the exhaust (plus carb tuning and HEI ignition tuning which results in a lower hp rating for the '75):
http://www.corvetteforum.net/c3/vette73/compair.htm
tom...
[Modified by Tom73, 11:48 AM 3/17/2003]
Race Director
Joined: Apr 1999
Posts: 15,148
Likes: 477
From: NM
Re: Need info on 75 L-82 (gtr1999)
Thanks Tom, I didn't know if the L-82's came with a factory aluminum intake like the LT1 did? Gary
The early L82's had iron intakes, same intake as used on the base L48. Later L82's (77 or 78 on) used an aluminum intake but all it did was save weight, was the same as the iron one.
The LT1 used a high rise aluminum intake which would not fit under the L82's hood. :)
tom...
Instructor
Joined: Jun 2001
Posts: 188
Likes: 0
From: nova scotia canada
Re: Need info on 75 L-82 (Tom73)
actually i am running a highrise al. intake from a '70 LT1 on my '76 along with a holley 750 duel feed and drop base air cleaner with k&n filter and extreme air flow top, i have about 1 inch clearance to the hood.
thanx wade
thanx wade
