Help with Poly control arm bushings
Thread Starter
Cruising
Joined: Mar 2003
Posts: 14
Likes: 0
From: Hilliard FL
Help with Poly control arm bushings
I no longer have the inside washer for the bushings to go back on my front control arms. It looks like the new bushings should have come with this washer if it is needed. Which lead me to my first question.
Are these washers needed?
If they are needed, where can I get them?
Thanks
Are these washers needed?
If they are needed, where can I get them?
Thanks
Melting Slicks
Joined: Jul 2002
Posts: 3,128
Likes: 3
From: Deltona (son of Deland and DAYTONA) FL
Re: Help with Poly control arm bushings (Blue73Red)
Not sure, but I can see that happening to me. That is why my car is on the way to Van Steel to install the kit! :smash:
Melting Slicks
Joined: May 2002
Posts: 2,508
Likes: 0
From: Wisconsin
Re: Help with Poly control arm bushings (Blue73Red)
Yeah, I make need one of those large washer metal discs that go on the outside where the bolt goes through if I can't find it. I used the impacted to unscrew it (worked so nicely) and then the impacted tossed into the wall and under the workbench. It's gotta be around here somewhere...
Team Owner
Joined: May 2001
Posts: 29,745
Likes: 3
From: Exiled to Richmond, VA - Finally sold my house in Murfreesboro, TN ?? Corner of "Bumf*&k and 'You've got a purdy mouth'."
CI 6-7-8 Veteran
CI-VIII Burnout Champ
St. Jude Donor '06-'10, '13
Re: Help with Poly control arm bushings (Van Steel)
Yes you need them. The bushing could slide out if you don't have it on.
[Modified by Van Steel, 9:23 AM 3/21/2003]
[Modified by Van Steel, 9:23 AM 3/21/2003]
