BUILD ME AN ENGINE
Thread Starter
Instructor
Joined: Mar 2003
Posts: 162
Likes: 0
From: Niagara Falls Ontario
BUILD ME AN ENGINE
Thiis what i have,454 stock with a TORKER 2 intake ,holley 750 double pumper ,MSD 6A electronic distributor. What i would like is slightly more power say about 500hp or a little more. :auto:
Drifting
Joined: Dec 2002
Posts: 1,861
Likes: 2
From: New Zealand
Re: BUILD ME AN ENGINE (74BBcherryred)
Power will be made through new heads and cam. There's heaps of aftermarket gear available...your choice will depend on what you're planning on doing with the extra horsepower; drag racing, circuit racing, street, etc.
With cam selection for the street, don't go too lumpy or it will affect driveability...a lumpy cam will require a stall convertor if you've got auto trans.
With cam selection for the street, don't go too lumpy or it will affect driveability...a lumpy cam will require a stall convertor if you've got auto trans.
Thread Starter
Instructor
Joined: Mar 2003
Posts: 162
Likes: 0
From: Niagara Falls Ontario
Re: BUILD ME AN ENGINE (Corey 68)
Idon't want too radical cam and it is for the street only ,i would think i would want the power around 3500.If i could get a couple different set ups i can work out what i can afford.
