PISTON DOME HEIGHT VS CC'S
Thread Starter
Burning Brakes
Joined: Aug 2000
Posts: 1,211
Likes: 6
PISTON DOME HEIGHT VS CC'S
I AM USING THE "SMOKE-EM-UP" SITE TO DETERMINE SOME COMPRESSION RATIOS WITH DIFF SIZE HEADS, ETC. THE ONE THING I DON'T KNOW IS HOW TO RELATE THE HEIGHT OF THE PISTON DOME INTO CC'S.
IN MY CASE THIS IS FOR AN L-36 427/390. THE PISTON IS THE TRW L2300 (30 OVER) WITH A DOME HEIGHT OF .140 . HOW TO CONVERT THAT HEIGHT INTO PISTON CC'S???
ANY TAKERS???
THANKS, MARK
IN MY CASE THIS IS FOR AN L-36 427/390. THE PISTON IS THE TRW L2300 (30 OVER) WITH A DOME HEIGHT OF .140 . HOW TO CONVERT THAT HEIGHT INTO PISTON CC'S???
ANY TAKERS???
THANKS, MARK
Le Mans Master
Joined: Jul 2001
Posts: 9,622
Likes: 16
From: absecon nj
Re: PISTON DOME HEIGHT VS CC'S (marky mark)
im gone to go with -14cc i looked at a few other pistons .180 dome and there -17cc and .080 dome are -7cc anytime you have a domed piston its always a negative number and when y ou have a dished piston its a + number,so id say your somewhere around -12 to -15cc,thats my guessimate. :D
