"Drop" motor mounts for BB?
Safety Car
Joined: Nov 1999
Posts: 4,466
Likes: 0
From: Paducah KY
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
St. Jude Donor '03
Re: "Drop" motor mounts for BB? (WA 2 FST)
The urethane mounts will lower your engine a little, but be careful about pan to steering ram clearance. Probably not a problem with stock pan.
Melting Slicks
Joined: Jul 2002
Posts: 3,128
Likes: 3
From: Deltona (son of Deland and DAYTONA) FL
Re: "Drop" motor mounts for BB? (WA 2 FST)
also watch pulley clearances up front. I don't know if BB have the PS pump low like on my SB, but there is already too little clearance there IMO.
Burning Brakes
Joined: Apr 2000
Posts: 1,145
Likes: 1
Re: "Drop" motor mounts for BB? (WA 2 FST)
Out of curiosity I checked the height of my new small block, and it is about .5" lower than the old one. I am using stock mounts. In my research for motor mounts, I only come across two types for Chevy's: 'tall and narrow' and 'short and wide'. None are specific to a car or engine size.
Good luck and let us know if you find them.
Chris
Good luck and let us know if you find them.
Chris
