Steeroids
Thread Starter
Drifting
Joined: Jan 2002
Posts: 1,500
Likes: 0
From: N.Y
Re: Steeroids (aharte)
Thanks Aharte thats what i wanted to know. I hate the idea of denting new headers. I wonder if there is a set of 1 3/4 headers that would fit right in. There is plenty of room to do so. Is there any chance that you have a pic? My dynomax headers fit with no problimes but there on the small side. Thanks :confused:
Drifting
Joined: Feb 2002
Posts: 1,906
Likes: 0
From: Berlin
Re: Steeroids (78 Vette)
Sorry I don't have a pic. I don't have a camera, or even the car right now. I understand about not wanting to dent new headers. Mine were already dented when the motor mounts busted (discovered that when pressing full throttle in first locked the steering column :eek: )
Thread Starter
Drifting
Joined: Jan 2002
Posts: 1,500
Likes: 0
From: N.Y
Re: Steeroids (flynhi)
Im running a 383 10.30 comp, 540 lift roller cam, airgap intake, 750 carb, and plenty of other goodies. Oh ya I ran best of 12.90 at 108 with a stock tranny stock converter and 308 gears. Im in the middle of installing a 4l80e 3000 converter and 3.70 gears. That should get me into the low 12.00 sec range :yesnod: I hope :D The motor seems to like to be shifted at 6200-6700.
[Modified by 78 Vette, 5:43 PM 5/18/2003]
[Modified by 78 Vette, 5:43 PM 5/18/2003]
