How to remove carbon buildup from engine?





As far as chemicals, the best is Chevron Engine Cleaner. NOT the fuel injector cleaner, but the stronger product. It has Techron, which is also what is in the GM Engine cleaner ------ "Fuel System Treatment
Cleans carbon deposits from carburetors, fuel injectors, intake valves, intake ports, and combustion chambers.
12 oz. size treats up to 12 gallons of fuel and is designed for small cars and trucks. 20 oz. size treats up to 20 gallons of fuel and is designed for larger cars, light-duty trucks, and sport utility vehicles.
Size: Item #:
12 oz. 12345515
20oz. 12345104 "
I have seen mechanics soak old pistons and valves in this stuff and the carbon just comes right off.
no harm was done.
I also did a similar thing to my 96 lumina sedan.
boy the ECM Loved! that
The Best of Corvette for Corvette Enthusiasts
Good luck :cheers:





Not only id I use this on my car ( follow directions on can)
It was listed in a service bulletin on Volvo's in the late 80's, early 90's to cure rough idle and pinging. Appartently other manufacturers think it's a good product too!
Eventually I'll do the same thing with the Vette, perhaps a different brand, but I'll do the same procedure.







