Jet Hot Coating
Thread Starter
Safety Car
Joined: Jul 1999
Posts: 4,430
Likes: 0
From: Harrisonburg, VA
Jet Hot Coating
Is Jet Hoat coating something you can buy and apply by yourself, like paint, or is it something that needs to be done by a shop with specialty equipment, like powder coating?
If the former, where an you buy the product?
If the later, how is the best way to go about finding a shop which does such services?
We would like to have our headers coated, as they are not the sharpest looking thing in the engine area. :)
If the former, where an you buy the product?
If the later, how is the best way to go about finding a shop which does such services?
We would like to have our headers coated, as they are not the sharpest looking thing in the engine area. :)
Race Director
Joined: Jan 2000
Posts: 12,399
Likes: 247
From: San Jose CA
Re: Jet Hot Coating (Vettastic)
It is the latter. Jet Hot does it themselves, you mail them your header.
I don't know if it's available at local places. I would ask exhaust shops if they know who does it.
http://www.jet-hot.com/
-Steve
I don't know if it's available at local places. I would ask exhaust shops if they know who does it.
http://www.jet-hot.com/
-Steve
Thread Starter
Safety Car
Joined: Jul 1999
Posts: 4,430
Likes: 0
From: Harrisonburg, VA
Re: Jet Hot Coating (Pacin'California)
OK, thanks Steve!
Do you know if you could have the pipes coated as well as the headers. It is a 4" Hooker setup, and we would want the pipes to look as nice as the headers. :)
Do you know if you could have the pipes coated as well as the headers. It is a 4" Hooker setup, and we would want the pipes to look as nice as the headers. :)
Race Director
Joined: Jan 2000
Posts: 12,399
Likes: 247
From: San Jose CA
Re: Jet Hot Coating (Vettastic)
I'm 99.9% sure they can do that too. If anything, it would be easier in my mind. :) Go for it.
Give them a ring.
-Steve
PS Could you do me a favor and ask how much it would cost to have a set of hooker comp headers for a small block chevy coated? 1 5/8" primaries x 24" length. No accessories (like AIR) on the header.
[Modified by Pacin'California, 11:46 AM 8/7/2003]
Give them a ring.
-Steve
PS Could you do me a favor and ask how much it would cost to have a set of hooker comp headers for a small block chevy coated? 1 5/8" primaries x 24" length. No accessories (like AIR) on the header.
[Modified by Pacin'California, 11:46 AM 8/7/2003]
Le Mans Master
Joined: Apr 2000
Posts: 5,202
Likes: 10
From: cincinnati ohio
St. Jude Donor '09
Re: Jet Hot Coating (Vettastic)
Jet hot did mine a couple years ago, headers, sidepipes inside and out...about $600.00......... 
[Modified by yellow 72, 3:42 PM 8/7/2003]
[Modified by yellow 72, 3:42 PM 8/7/2003]
Le Mans Master
Joined: Oct 2001
Posts: 5,145
Likes: 125
From: The Motor City
Re: Jet Hot Coating (yellow 72)
Call up Chris at Jet Hot. 1-800-432-3379 ext 110. Tell him that you're with Corvette Forum and he should hook you up. You're probably looking at between $400 and $500. I'm looking at doing the same to my pipes.
Race Director
Joined: Dec 1999
Posts: 11,096
Likes: 990
From: Sierra Foothills CA
Re: Jet Hot Coating (Scooter70)
Call up Chris at Jet Hot. 1-800-432-3379 ext 110. Tell him that you're with Corvette Forum and he should hook you up. You're probably looking at between $400 and $500. I'm looking at doing the same to my pipes.
Drifting
Joined: Sep 2001
Posts: 1,427
Likes: 1
From: Boxford Mass
Re: Jet Hot Coating (Les)
They do coat inside & out. They carry a full line of Hooker headers too. It was much cheaper to buy my headers directly from them vs. just having them apply the coating.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Racer
Joined: Jan 2003
Posts: 270
Likes: 0
From: Erie pa
Re: Jet Hot Coating (Vettastic)
I agree with getting them done by jet hot or another coating style company like HPC. Mine were done 2 years ago and look great. I had a problem with some discoloration on the tubes after about 6 months, and they told me to send them back and they redid them for nothing!
In the past I tried to do them myself with POR 15 header paint and it was horrible. It flaked off in 5 minutes. It is well worth hte cost to have them done.
Eric
In the past I tried to do them myself with POR 15 header paint and it was horrible. It flaked off in 5 minutes. It is well worth hte cost to have them done.
Eric
Burning Brakes
Joined: Sep 2002
Posts: 1,179
Likes: 3
From: SF East Bay CA
Re: Jet Hot Coating (Vettastic)
I have seen Jet Hot.. Good product. For those in SF Bay Area, if you take the drive to Sanderson in South S.F., they will get your stuff turned around in 4 days. Get your headers there and you could get same day if not special ordered. Pay cash and you will get a nice surprise on the price... They do a really nice job, almost looks like chrome and they do the inside and out... For a price point, I paid 140 for my headers coated (out the door, cash price) If outside the area and dealing with Mail, it would be more expensive....
Le Mans Master
Joined: Oct 2001
Posts: 5,145
Likes: 125
From: The Motor City
Re: Jet Hot Coating (timbo79)
FYI: I just talked to Chris at Jet Hot. The cost for a set of Hooker SuperComp headers and sidepipes (without mufflers) would be $942 delivered. The cost to have them strip and coat your current set is $237.30 + shipping. Summit gets $389.95 for the headers and $209.69 for the sidepipes. You do the math. (Dangit!! The 10% off deal at Summit ended yesterday. Why didn't I call yesterday?!?!??!) Mention something about the GP and the Forum if you talk to Chris.
