Steering Column ???
Thread Starter
Racer
Joined: Apr 2002
Posts: 336
Likes: 0
From: Lafayette, Indiana
Steering Column ???
Can anyone tell me if any other GM cars have the same steering column as my 68? (Non tilt, Non telescopic)
When I spin the shaft it does not turn true. Do you think the shaft is bent, or something loose or worn in the column?
I already have the rag joint out. Do you just remove the two bolts at the fire wall, and two under dash and pull it out? How difficult are these to rebuild?
When I spin the shaft it does not turn true. Do you think the shaft is bent, or something loose or worn in the column?
I already have the rag joint out. Do you just remove the two bolts at the fire wall, and two under dash and pull it out? How difficult are these to rebuild?
Melting Slicks
Joined: Jan 2003
Posts: 3,029
Likes: 94
From: meraux LA
Re: Steering Column ??? (Indy Year 25)
it sounds like you need to replace the lower bearing in the steering column. It not a hard job to do. You will need to pull the column out of the car. hope this helps. :cool:
