paging brutus
Drifting
Joined: May 1999
Posts: 1,610
Likes: 3
From: Goulburn, Australia NSW
Re: paging brutus (74 vert)
Brad...No not yet. I'm still in the process of tearing down the 383 I bought last week as well as putting the rest of the car back together for Summer although with the way Winter has been here this year, you wouldn't know the difference. :yesnod:
I'm still wondering about getting a good head bolt set from somewhere first as from what I read on AFR's site there are a couple of bolts that may need to have smaller heads. Also I'm still researching which would be the best cam to run in it.
Well that's where I'm at so far. :cheers:
[Modified by Brutus, 7:28 PM 8/15/2003]
I'm still wondering about getting a good head bolt set from somewhere first as from what I read on AFR's site there are a couple of bolts that may need to have smaller heads. Also I'm still researching which would be the best cam to run in it.
Well that's where I'm at so far. :cheers:
[Modified by Brutus, 7:28 PM 8/15/2003]
Thread Starter
Melting Slicks
Joined: Jan 2003
Posts: 2,165
Likes: 8
From: Where are the Smoky Mountain Cruisers? Not Correctly Restored Stingray
Re: paging brutus (Brutus)
http://www.intellicast.com/Local/Int...t&prodnav=none
:cool: weather looks good, almost too hot here, beverage consumption increased with temperature. :cheers: keep us informed concerning the match between hooker sidepipes and AFR's. Are you working with the 195's?
[Modified by 74 vert, 4:23 PM 8/15/2003]
:cool: weather looks good, almost too hot here, beverage consumption increased with temperature. :cheers: keep us informed concerning the match between hooker sidepipes and AFR's. Are you working with the 195's?
[Modified by 74 vert, 4:23 PM 8/15/2003]
