[Project 79] Update on the Project
Thread Starter
Platinum Supporting Dealership
Joined: Dec 1999
Posts: 6,425
Likes: 1
From: Traveling the US
[Project 79] Update on the Project
Well, I feel like we really turned the corner this week. We have a nice shiny motor now, and only a few more non- new or restored parts left to deal with.
http://vettefinders.com/index.cfm?fuseaction=79part19
I haven't ever replaced a header bar before, so that is really my only task left I haven't done before.
:thumbs: :cheers:
[Modified by Chris@VetteFinders, 9:10 PM 8/18/2003]
http://vettefinders.com/index.cfm?fuseaction=79part19
I haven't ever replaced a header bar before, so that is really my only task left I haven't done before.
:thumbs: :cheers:
[Modified by Chris@VetteFinders, 9:10 PM 8/18/2003]
Race Director
Joined: Jun 2001
Posts: 16,483
Likes: 1
From: The Only Corvette in Gila Bend, Az.
St. Jude Donor '09
Re: [Project 79] Update on the Project (burners)
Nice work, And thanks for the link to Lar's valve adjustment paper. Me and BSeery could have used that a few months ago on his truck.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
