competition vs super comps??
Race Director
Joined: Aug 1999
Posts: 18,126
Likes: 174
From: WI
Re: competition vs super comps?? (LT1driver)
I can`t tell you the difference but I have Hooker competition/ race headers w/side pipes and there is NO way to install a muffler the side pipe is bent at both ends. ...redvetracr
Race Director
Joined: Dec 1999
Posts: 19,610
Likes: 778
From: Forked River NJ
Re: competition vs super comps?? (redvetracr)
I think the Comps are 1 5/8 tubes and not very equal length. The Super Comps are 1 3/4 tubes and the length is more equal. This is for small blocks not sure on big blocks. I am running the Comps on mine and they work fine
Instructor
Joined: Jul 2001
Posts: 183
Likes: 0
From: Brighton MI
Re: competition vs super comps?? (Gordonm)
I think the Comps are 1 5/8 tubes and not very equal length. The Super Comps are 1 3/4 tubes and the length is more equal. This is for small blocks not sure on big blocks. I am running the Comps on mine and they work fine
Drifting
Joined: Nov 2002
Posts: 1,665
Likes: 1
From: Ontario
Re: competition vs super comps?? (LT1driver)
Comp approx $140
Super approx $300
Why? Super comp are lighter, and they somehow 'make more power'.
http://www.holley.com/HiOctn/TechSer.../ESHHTech.html
Super approx $300
Why? Super comp are lighter, and they somehow 'make more power'.
http://www.holley.com/HiOctn/TechSer.../ESHHTech.html
Safety Car
Joined: Oct 1999
Posts: 4,101
Likes: 10
From: NorCal
Re: competition vs super comps?? (Boofers)
Super comps are larger tube, equal length headers, and thus make more upper end power but sacrifice low end torque. You need an engine that lives in the 3-7K range or higher to benefit from the Super comps. Having said that, it was the single best thing I ever did for my BOSS 302. Absolutely amazing increase in performance.
Hans
Hans
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Race Director
Joined: Feb 2000
Posts: 12,431
Likes: 1
From: CT
Re: competition vs super comps?? (mountainmotor)
Supercomps also have a thicker flange along with equal tube length.
Only straight plug heads with the SuperComps.
Work great even on the 327's
Only straight plug heads with the SuperComps.
Work great even on the 327's
Burning Brakes
Joined: Aug 2001
Posts: 1,002
Likes: 0
From: Bay City MI.
Re: competition vs super comps?? (LT1driver)
I went with Sanderson headers for my BB, there quality and fit are excellent and I paid less than what the super comps cost. Mine are block hugger design with 1 3/4 tubes into a 3" collector. I have heard that Hooker has had many quality problems and so far after 2+ years mine are still perfect. Check them out on the web at http://www.sandersonheaders.com . I think a few other members have them as well, very good product you will like them. Oh yeh, get the jet coated ones......
Drifting
Joined: Feb 2000
Posts: 1,607
Likes: 0
From: Clarksville,Tn,USA TN
Re: competition vs super comps?? (467-Ratman)
I have angled plug heads too, Trick Flow 23 degree installed with no problems on my 388ci motor. I have the Super Comp. Sidepipe headers and I used Stage 8 header bolts to lock them down.
Neil in Tenn
[Modified by Nomad78SA, 5:14 PM 9/13/2003]
Neil in Tenn
[Modified by Nomad78SA, 5:14 PM 9/13/2003]
