Parts wish list...... !!!
Racer
Joined: Apr 2003
Posts: 486
Likes: 0
From: Point Pleasant NJ
Re: Parts wish list...... !!! (69Rat)
Instant Fix - something breaks it automatically fixes itself
Fairy Duster - Radar and GPS set to seek and destroy Rice
Magic Fuel - pellets that will triple, heck quadruple! my gas mileage
Pork Prevention - Keeps that bacon smell away :D
Spook
:reddevil
Fairy Duster - Radar and GPS set to seek and destroy Rice
Magic Fuel - pellets that will triple, heck quadruple! my gas mileage
Pork Prevention - Keeps that bacon smell away :D
Spook
:reddevil
Thread Starter
Racer
Joined: Jul 2003
Posts: 287
Likes: 0
From: Dayton Area Ohio
Re: Parts wish list...... !!! (Spook)
I was thinking more like...
- off-set TA's with Coil-over mounts.
- narrow rear sway bars to clear offset TA's.
- modern brake caliper kits.
- Air suspensions
- Stainless Steel sidepipe headers {like Hookers}
- Whipple supercharger / port fuel injection system.
- tubular front A-arms and coil-over suspension
- 9" ford center section w/ billet half shafts {aka Indy style}
Something like that... :D
- off-set TA's with Coil-over mounts.
- narrow rear sway bars to clear offset TA's.
- modern brake caliper kits.
- Air suspensions
- Stainless Steel sidepipe headers {like Hookers}
- Whipple supercharger / port fuel injection system.
- tubular front A-arms and coil-over suspension
- 9" ford center section w/ billet half shafts {aka Indy style}
Something like that... :D
Le Mans Master
Joined: Apr 2003
Posts: 7,154
Likes: 1
From: I blame my Dyslexia MD
Re: Parts wish list...... !!! (69Rat)
stainless steel under body detachable plates for protection and aerodynamics, ill just make one my self.
a tubbing kit for the front
a 427 for under 100 dollars that makes over 800 hp
a heat insulation kit that really works
a rear seat for when more than one girl wants a ride, it happens alot and apparently alot of people dont realize its a 2 seater, so they say they will go in thier trunk.
a ford rear end converted to be a independent suspension and fit a vette.
MAtt
[Modified by pillowmeto, 11:13 PM 9/18/2003]
a tubbing kit for the front
a 427 for under 100 dollars that makes over 800 hp
a heat insulation kit that really works
a rear seat for when more than one girl wants a ride, it happens alot and apparently alot of people dont realize its a 2 seater, so they say they will go in thier trunk.
a ford rear end converted to be a independent suspension and fit a vette.
MAtt
[Modified by pillowmeto, 11:13 PM 9/18/2003]
Melting Slicks
Joined: Sep 2001
Posts: 2,218
Likes: 0
From: Glendale AZ
Re: Parts wish list...... !!! (69Rat)
-a kit for a removable/tilt foward front end
-a bolt in roll bar for head protection, and 4 point harness attachment
-a HUD kit (..yea baby)
-a stinger type hood that is long enuff to eleminate the wiper door.
- a "shaker" cold air induction hood
-better c3 hats from ecklers
cheers
chad
-a bolt in roll bar for head protection, and 4 point harness attachment
-a HUD kit (..yea baby)
-a stinger type hood that is long enuff to eleminate the wiper door.
- a "shaker" cold air induction hood
-better c3 hats from ecklers
cheers
chad
Melting Slicks
Joined: Mar 1999
Posts: 2,845
Likes: 2
From: Apex NC
Re: Parts wish list...... !!! (69Rat)
Correct reproduction parts that are actually configured exactly like the part that is supposedly being reproduced. With equal quality and proper dimensions so that they actually fit and appear original.
Le Mans Master
Joined: Aug 2000
Posts: 9,662
Likes: 7
From: Semper ubi, sub ubi
Cruise-In VI Veteran
Cruise-In VII Veteran
Re: Parts wish list...... !!! (sb69coupe)
Correct reproduction parts that are actually configured exactly like the part that is supposedly being reproduced. With equal quality and proper dimensions so that they actually fit and appear original.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Advanced
Joined: Aug 2003
Posts: 71
Likes: 0
From: Kailua Hawaii
Re: Parts wish list...... !!! (Yellow79)
great ideas all... as for me... ahem...
A blown MPEFI aluminum big block with nitrous that will fit under a stock hood.
Oh, and coil overs, tubular a-arms, flip-top front end, fixed headlights a la c5-r, and a 1lb. bottle that holds 10lbs. of nitrous... and it would be nice if the above blower had a clutch/bypass... :D
A blown MPEFI aluminum big block with nitrous that will fit under a stock hood.
Oh, and coil overs, tubular a-arms, flip-top front end, fixed headlights a la c5-r, and a 1lb. bottle that holds 10lbs. of nitrous... and it would be nice if the above blower had a clutch/bypass... :D
Melting Slicks
Joined: Jul 2002
Posts: 3,000
Likes: 22
From: Boulder Creek California
Re: Parts wish list...... !!! (Viken)
Yes, I bookmark everything :-D http://www.rollhard.com/defihud.htm
Also, a removeable rear window kit for later years, so I don't have to scrounge for all the parts!
[Modified by RUXperienced, 12:28 AM 9/19/2003]
Also, a removeable rear window kit for later years, so I don't have to scrounge for all the parts!
[Modified by RUXperienced, 12:28 AM 9/19/2003]
Race Director
Joined: Jun 2001
Posts: 16,483
Likes: 1
From: The Only Corvette in Gila Bend, Az.
St. Jude Donor '09
Re: Parts wish list...... !!! (RUXperienced)
Rear hatch window hinges for the 82 CE.
Viagra.
Pre-ported crossfire intake manifold, with bored TB's.
2X4 with leather grip for wacking teenage daughters over the head with.
That ought to do it. :thumbs:
Viagra.
Pre-ported crossfire intake manifold, with bored TB's.
2X4 with leather grip for wacking teenage daughters over the head with.
That ought to do it. :thumbs:
