Bent frame, how to fix?

Reply Subscribe

Thread Tools

Search this Thread

Sep 24, 2003 | 01:42 PM

shamby

Thread Starter

Pro

Joined: Jul 2001

Posts: 704

Likes: 10

From: Blairsville Ga

Bent frame, how to fix?

The front part of the frame, below the harmonic balancer is all beat up. I think most of the damage is from previous owners using it to jack up the car. Any ideas on how this can be repaired would be greatly appreciated.

Sep 24, 2003 | 01:53 PM

76greg

Racer

Joined: Dec 1999

Posts: 425

Likes: 1

From: South Elgin, IL, USA

Re: Bent frame, how to fix? (shamby)

Me too! Bubba must have used a bottle jack there! :crazy:
I may have been able to fix this when my engine was out, but I forgot. :(

Greg :cheers:

Sep 24, 2003 | 01:55 PM

shamby

Thread Starter

Pro

Joined: Jul 2001

Posts: 704

Likes: 10

From: Blairsville Ga

Re: Bent frame, how to fix? (76greg)

I have my engine out and the frame is apart so now is the time to fix it, but I have know idea on how.

Sep 24, 2003 | 02:35 PM

sb69coupe

Melting Slicks

Joined: Mar 1999

Posts: 2,845

Likes: 2

From: Apex NC

Re: Bent frame, how to fix? (shamby)

The bottom of the front crossmember is relatively thin metal and doesn't really provide much in the way of structural rigidity. Zip sells a replacement lower portion repair panel for $139. Part number M-3280. You can cut out the old panel and weld in the new one.

Shannon

Sep 24, 2003 | 02:37 PM

shamby

Thread Starter

Pro

Joined: Jul 2001

Posts: 704

Likes: 10

From: Blairsville Ga

Re: Bent frame, how to fix? (sb69coupe)

Thanks for the info. I'll get one ordered. I wonder what a welding shop would charge me to weld it in?

Sep 24, 2003 | 04:47 PM

GTR1999

Tech Contributor

Joined: Aug 1999

Posts: 15,156

Likes: 3,965

From: Connecticut, USA

Re: Bent frame, how to fix? (shamby)

I would look into welding in a heavier piece of metal or supports under the plate. If done correct you won't be able to see it and it will add strength to that spot so you can jack it there.
Gary