Rear Transmission Bushing

Reply Subscribe

Thread Tools

Search this Thread

Sep 28, 2003 | 08:14 PM

Bobchad

Thread Starter

Burning Brakes

Joined: Jun 2002

Posts: 792

Likes: 2

From: Norcross GA

Rear Transmission Bushing

I'm going to replace the rear trans bushing while I have the drive shaft out. Should I go with poly, $10 v. $30, and how do I support the rear of the trans as I remove the small section of frame that appears to be held in place by about 6 bolts that the trans bolts to? The only available area that you could get a jack with a board on it appears to be the pan and that can't be good. Or is static support not needed?

Bob

Sep 28, 2003 | 08:19 PM

1979toy

Melting Slicks

Joined: Dec 2000

Posts: 2,041

Likes: 0

From: Wichita, KS

Re: Rear Transmission Bushing (Bobchad)

I put a jack and a board under the pan. It worked for me. :D

Sep 28, 2003 | 08:43 PM

Bobchad

Thread Starter

Burning Brakes

Joined: Jun 2002

Posts: 792

Likes: 2

From: Norcross GA

Re: Rear Transmission Bushing (1979toy)

Thanks.

Reply Subscribe