Exactly What I thought - Power Window Problem Drivers Side
Thread Starter
Racer
Joined: Apr 2003
Posts: 486
Likes: 0
From: Point Pleasant NJ
Exactly What I thought - Power Window Problem Drivers Side
Hey all;
Give you 1 guess why my drivers side window wouldnt go all the way up.
Heres a hint... hehe
Just what I expected to see.
Gotta figure what I wanna do to replace it. Go with just the overlaying tooth plate or replace the whole thing. I think its even cheaper just to do the whole plate.
Spook
:reddevil
Give you 1 guess why my drivers side window wouldnt go all the way up.
Heres a hint... hehe
Just what I expected to see.
Gotta figure what I wanna do to replace it. Go with just the overlaying tooth plate or replace the whole thing. I think its even cheaper just to do the whole plate.
Spook
:reddevil
Safety Car
Joined: Oct 2000
Posts: 4,282
Likes: 172
From: Lake Wylie, South Carolina
Re: Exactly What I thought - Power Window Problem Drivers Side (Spook)
Spook,
Keep us informed on what you do. The gear on the drivers side of my car is bad to. I can't decide on whether to get the whole new plate or just the overlaying teeth either. Have you looked into how dificult it is to take the plate off?
Keep us informed on what you do. The gear on the drivers side of my car is bad to. I can't decide on whether to get the whole new plate or just the overlaying teeth either. Have you looked into how dificult it is to take the plate off?
Drifting
Joined: Feb 2003
Posts: 1,461
Likes: 2
From: Allen TX
Re: Exactly What I thought - Power Window Problem Drivers Side (BlackRat)
Yeah my drivers side window works at the top and the bottom but nothing in the middle. So I am looking at getting new gears too. But havent decided if I want to get the whole thing or just the overlying gears. Keep us posted. :chevy
Thread Starter
Racer
Joined: Apr 2003
Posts: 486
Likes: 0
From: Point Pleasant NJ
Re: Exactly What I thought - Power Window Problem Drivers Side (RCDriveryo)
Ill take all sorts of pictures when I do it for ya'll. I think I am going the whole gear route. We shall see.
Spook
:reddevil
Spook
:reddevil
Melting Slicks
Joined: Oct 2001
Posts: 2,065
Likes: 1,395
From: Halifax, Nova Scotia, Canada
Re: Exactly What I thought - Power Window Problem Drivers Side (Spook)
Another approach..............
Several years ago a buddy had the same thing happen to his regulator.
He wanted a cheap fix.
So I built up ,welded (arc), the worn area, then with a grinder, cut new teeth in the built up area.
It didn't take very long to do, and worked fine.
Not sure how long this fix would work, as he sold the car within a year.
Barry
Several years ago a buddy had the same thing happen to his regulator.
He wanted a cheap fix.
So I built up ,welded (arc), the worn area, then with a grinder, cut new teeth in the built up area.
It didn't take very long to do, and worked fine.
Not sure how long this fix would work, as he sold the car within a year.
Barry
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
