[73sbvert] Here are the Autometer pics you requested......
Thread Starter
Team Owner
Joined: Feb 1999
Posts: 34,454
Likes: 665
From: Republic of Texas
[73sbvert] Here are the Autometer pics you requested......
Paul, here are the pics you asked for buddy. :)
I cut two plexiglass pieces to allow the guages to mount to the stock housing. You can find the plexiglass at any hardware store, it's about 1/4in thick maybe a little less. As far as the "blinkers" and "brights" indicators I purchased them from RadioShack for a $1.50 a piece. The install is pretty straight forward, hardest part was cutting the plexiglass. The new gauges will be more accurate, gives the car a new look, and saved me a couple pounds in the process. :D Let me know if you need any more pics. :cheers:
I cut two plexiglass pieces to allow the guages to mount to the stock housing. You can find the plexiglass at any hardware store, it's about 1/4in thick maybe a little less. As far as the "blinkers" and "brights" indicators I purchased them from RadioShack for a $1.50 a piece. The install is pretty straight forward, hardest part was cutting the plexiglass. The new gauges will be more accurate, gives the car a new look, and saved me a couple pounds in the process. :D Let me know if you need any more pics. :cheers:
Safety Car
Joined: Nov 1999
Posts: 4,466
Likes: 0
From: Paducah KY
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
St. Jude Donor '03
Re: [73sbvert] Here are the Autometer pics you requested...... (Corey 68)
I'm impressed! That is a very nice job. :cheers:
Dave
Dave
Crackin' on...
Joined: Jun 2003
Posts: 9,447
Likes: 124
From: Somewhere in Tucson AZ
St. Jude Donor '09
Re: [73sbvert] Here are the Autometer pics you requested...... (Corey 68)
Thanks man! I sure appreciate it!
Very :cool: job! I hope mine turns out half as good!
Paul
Very :cool: job! I hope mine turns out half as good!
Paul
